The Toro Z Master Z560 zero turn lawn mower comes with the choice of 3 different sized decks. The largest has a cutting width of 72 inches, while the smallest has a cutting width of 52 inches. The middle sized deck choice has a cutting width of 60 inches. These decks are all fairly similar except for their size (obviously). The only other major difference between the decks is that the larger decks will not be able to handle long grass as easily as the smallest deck. All 3 decks for the Z 560 are special ‘TURBO FORCE’ decks that are made from fabricated 7 gauge steel. They also have a reinforced leading edge which resists any knocks or bruises the deck will encounter during operation without allowing the deck to deform.

The blades inside the TURBO FORCE deck on the Toro Z Master Z560 are driven by an Aramid fiber belt. Each of the 3 blades housed in all 3 of the decks have been heat treated to keep them sharper for longer. The deck is raised and lowered using a spring assisted foot pedal. It can operate as low as 1.5 inches above the ground and as high as 5 inches above the ground.

The Toro Z Master Z560 gets it’s power from either a 30 hp Kohler engine or a 28 hp Kawasaki engine. Both engines use a fully pressurized lubrication system and both have twin cylinders. The cylinder are cast iron lined. The engines are prevented from overheating thanks to an air cooling system. To prevent dust and particulate matter from getting in to the engine, the Z Master Z 560 uses a heavy duty canister type air filter. Other models in the Z Master range that are quite like this one include both the Toro Z Master Z528 and the Toro Z Master Z558 zero turn lawn mowers.

Return to Toro from Toro Z Master Z560 Zero Turn Lawn Mower