The John Deere Mini Z-Trak 727A gets it’s power from a Kawasaki engine that pumps out 23 hp which makes it 4 hp more powerful than it’s smaller brother, the John Deere Mini Z-Trak 717A lawn mower. The engine has a displacement of 0.675 liters and is prevented from overheating thanks to an air cooling system. The engine transfers power to the rear wheels of the JD 727A through a dual hydrostatic transmission that allows the operator to control each rear wheel independent of the other, thus allowing you execute zero radius turns (by pressing the lap bars in opposite directions).

The engine also powers the mower deck on the John Deere Mini Z-Trak 727A zero turn lawnmower. This mower deck has a cutting width of 54 inches. The mower deck houses 3 blades, that each have a 19 inch diameter. The mower deck is made from 7 gauge steel and discharges grass clippings out the side of the deck. The blades are engaged using a Warner Magstop PTO. The operator can drop the JD 727A’s mowing deck as low as 1.5 inches above the ground while you can also raise it up to 5 inches above the ground if the grass you are cutting happens to be very long or damp. Between 1.5 and 5 inches, you can adjust the deck in very small 0.25 inch increments.

The John Deere Mini Z-Trak 727A sits on large rear wheels that measure 23×9.5-12 (23 inch diameter, 9.5 inch width, 12 inch diameter) that propel it up to a top speed of up to 14.5 kph (9mph), while it can reverse it can reach up to 6.4 kph (4 mph). If you are looking for other zero turn mowers from John Deere that have either more power or larger cutting widths, then you may be interested in the John Deere Z960A or the John Deere Z970A zero turn lawn mowers.

Return to John Deere Lawn Mowers from John Deere Mini Z-Trak 727A Zero Turn Lawnmower

Return to John Deere from John Deere Mini Z-Trak 727A Zero Turn Lawn Mower