The John Deere JA62 walk behind lawn mower is very similar to the John Deere JX75 walk behind lawnmower as both have an aluminum deck. The also both have the same cutting width which is 21 inches. When you are operating the JD JA62, many people tend to use the 2.5 bushel bagger attachment to collect the grass clippings to keep their lawn looking neat and tidy. However, if you are in a rush or have nowhere to put the grass clippings, then you should consider the optional mulcher attachment which will turn the grass clippings into a fast rotting and nutritious mulch. Alternatively you can just discharge the grass clippings straight onto your lawn. Just remember though that if the grass is very long, then it will make your lawn look quite ugly.

The John Deere JA62 has 2 speeds. It also has an operator presence system which will shut down the engine if you are not holding on. This system has saved countless hands. The height of the mower deck on the JD JA62 can be adjusted through 3 inches, from a low of 0.5 inches above the ground to a high of 3.5 inches above the ground. There is an adjusting lever on both the front and back wheels for this.

The engine that powers the John Deere JA62 is a Briggs and Stratton. This is a 4 stroke motor with overhead valves. The total displacement of the Briggs and Stratton comes to 0.189 liters. To start the engine you simply need to pull on the pull cord. Unfortunately the JD JA62 does not have a key starting mechanism. Have you ever used the JA 62 lawn mower? If you have previously used this walk behind lawnmower then please leave a review below outlining what you think of it.

Return to John Deere Lawn Mowers from John Deere JA62 Walk Behind Lawnmower

Return to John Deere from John Deere JA62 Push Lawn Mower