There are many similar sized models of the Husqvarna EZC4824 zero turn lawn mower. These include the Husqvarna iZ4821 and the Husqvarna RZ4824F as well as the Husqvarna RZ4623 zero turn lawnmowers. The EZC 4824 zero turn lawn mower uses a Kohler Courage Pro twin cylinder engine to power the rear wheels as well as the mower deck. Power from the Kohler Courage Pro engine is transferred to the wheels through a ZT2800 dual hydrostatic transmission. This transmission is controlled by the 2 lap bars in front of the operator. The right lap bar controls the right rear wheel, while the left lap bar controls the left wheel. By pressing the lap bars in opposite directions, you can quickly and easily make a zero radius turn. The ZT 2800 transmission gives the lawnmower a top speed of 11.3 kph (7 mph).

The engine also powers the mower deck on the Husqvarna EZC4824 zero turn lawnmower. The mower deck is 60 inches wide with the protective plastic discharge flap down. However the total cutting width of the deck comes to 48 inches. This deck houses 3 separate mower blades, each of which has a length of 16.25 inches. The deck can be lowered and raised over a range of 3 inches, from a low of 1.5 inches to 4.5 inches above the ground.

The total weight of the Husqvarna EZC4824 comes to 290.3 kg (640 lbs). The front wheels on the EZC 4824 are fairly small, as they don’t have to carry too much weight. The measure just 11×4-5 (11 inch diameter, 4 inch width, 5 inch rim diameter) while the rear wheels which do the majority of the work are larger at 20×9.5-8 (20 inch diameter, 9.5 inch width, 8 inch rim diameter). Have you used the EZC4824 zero turn lawn mower? If so then we want to hear about your experiences with it. You can leave a review below.

Return to Husqvarna from Husqvarna EZC4824 Zero Turn Lawn Mower