The Toro TimeCutter Z4235 zero turn lawn mower is one of the smaller TimeCutters from Toro. It’s fairly similar in size to the Toro TimeCutter Z4200 and the Toro TimeCutter SS4200 lawnmowers. The engine powering the Z 4235 is a one cylinder Courage engine from Kohler. This engine is key started by a 12 volt battery. The 4 stroke engine has a displacement of 0.597 liters. The fuel tank supplying the engine with gasoline can hold up to 11.4 liters (3 US gallons). The total power output from the engine is 19 hp.

The Toro TimeCutter Z4235 uses a dual hydrostatic transmission to drive the wheels. The power directed to each rear wheel is controlled by dual comfort grip lap bars in front of the driver. Remember that the rear wheels are responsible for both the speed and steering of the Time Cutter Z 4235 lawnmower. These rear wheels each measure 18×7.5 (18 inch diameter, 7.5 inch width). The front wheels are a good bit smaller, each measuring 10×4 (10 inch diameter, 4 inch width). The dual hydrostatic transmission gives the Z4235 a top speed of 11.3 kph (7 mph) going forwards and 5.5 kph (3.4 mph) when it’s reversing.

The mower deck on the Toro TimeCutter Z4235 zero turn lawnmower has a cutting width of 42 inches. This mower deck is made from stamped steel and has 2 blades. The operator can raise and lower the deck on the TimeCutter Z4235 over 3 inches, from a low of 1.5 inches above the ground up to a height of 4.5 inches above the ground. The mowing deck is raised and lowered manually using a spring assisted hand lever. Even though the cutting width of the mower is 42 inches, it’s total width comes to 54 inches due to the plastic discharge flap on the side. You can also attach a rear bagger to the back of the lawnmower to collect the clippings.

Return to Toro from Toro TimeCutter Z4235 Zero Turn Lawnmower