The Cub Cadet ENFORCER 48 zero turn lawn mower is a little bigger than the Cub Cadet ENFORCER 44, but at the same time, it’s a little smaller than the Cub Cadet ENFORCER 54 lawn mower. Many people consider it to be the little brother in the ENFORCER series. The mower deck on the Enforcer 48 has a cutting width of 48 inches, although with the plastic discharge chute attached, the total width of the deck comes to 58 inches. The mower deck is floating and uses anti scalping wheels at the leading edge of the deck along with anti scalping rollers attached to the trailing edge of the deck to make sure that the deck follows the contours of the lawn while at the same time never catching or scarring/scraping it.

The mower deck on the Cub Cadet ENFORCER 48 lawnmower has a range of 3 inches for the mower deck from a low of 1 inch to a high of 4 inches above the ground. The deck is raised and lowered in tiny 0.25 inch increments so that you will almost always be able to get the cutting height that you want. Lowering and raising the deck on the Enforcer 48″ lawn mower is done with the help of a spring assisted foot pedal mechanism.

The engine on the Cub Cadet ENFORCER 48 zero turn mower has a max power output of 22 hp. This mower is a Kohler Command model. The engine is a twin cylinder and has a total displacement of 0.674 liters. It is kept cool using an air cooling system and is started by a 12 volt battery. The engine provides power to the mower deck through a belt drive mechanism. It powers the wheels on the Enforcer 48 through a dual Hydro-Gear ZT 2800 transmission. This allows the driver to control the lawn mower using the twin lap bars in front of him.

Return to Cub Cadet from Cub Cadet ENFORCER 48 Zero Turn Lawn Mower