The John Deere 2653B Precision Cut trim and surrounds lawn mower gets it’s power from a diesel Yanmar TNV70-XJGM engine. This engine uses a 2 stage air filter to clean the air intake of grass clippings and other particulate matter before it combines with the fuel mixture. The engine keeps cool thanks to a liquid cooling system. The engine uses a full pressure lubrication system to keep all the moving parts from seizing up. The capacity of the lubrication system is 3 liters. The total displacement of the 3 cylinder engine comes to 0.854 liters. The fuel tank capacity on the JD 2653B comes to 28 liters (7.4 US gallons).

Power from the engine on the John Deere 2653B Precision Cut mower is transferred to the wheels through a hydrostatic transmission that provides the golfing lawn mower with infinite speeds going forwards as well as in reverse. The mower unit on the JD 2653B is engaged by hand. The cutting unit is raised and lowered using hydraulic cylinders. The mowing unit itself consists of 3 units. The total cutting width varies from 72 to 84 inches, depending on what size the 3 mowing units are. Each cutting unit is made up of a reel (basically a cylinder) that has either 5 or 8 blades attached to it. The diameter of each reel comes to 7 inches.

The wheelbase of the John Deere 2653B Precision Cut lawn mower measures 55 inches and it has a total of height of 82 inches when the roll bar (ROPS) is upright. The minimum turning radius of the JD 2653B is 20 inches. The rear wheel on this mower measures 20×10-8 (20 inch diameter, 10 inch width, 8 inch rim diameter) while the 2 front wheels each measure 20×10-10 (20 inch diameter, 10 inch width, 10 inch rim diameter). The max speed that it can travel at while mowing is 8 kph (5 mph), but without the mowing unit engaged, it can travel at 13.7 kph (8.5 mph).

Return to John Deere Lawn Mowers from John Deere 2653B Precision Cut Mower

Return to John Deere from John Deere 2653B Precision Cut Trim & Surrounds Lawn Mower