The Poulan Pro PB195H42LT garden tractor lawn mower is often confused with the likes of the Poulan PO19542LT garden tractor as they both have the same power and the both have the same size cutting width. However there are a ton of differences between the 2. The PB195H42LT lawnmower uses a K-46 Tuff Torq hydrostatic transmission instead of a gearshift which means that it is much easier to operate with no gear changing. The engine that supplies power to the hydrostatic transmission is a Briggs and Stratton Intek engine that provides 19.5 hp. This is a 0.5 liter engine that has just one cylinder. It uses a full pressure lubrication system to keep that moving parts properly oiled. There is a paper based air filter which acts to prevent dust and other small particles from entering into the combustion chamber and potentially clogging them.

The top speed of the Poulan Pro PB195H42LT comes in at 8.4 kph (5.2 mph), while when it’s reversing, it has a top speed of 4.7 kph (2.9 mph). The fuel tank on the PB195 H42LT can hold just 5.7 liters (1.5 US gallons) of gasoline which would indicate that the tractor is mostly used by individuals in a residential setting.

The mower deck on the Poulan Pro PB195H42LT is 42 inches wide and has 2 blades. It can be raised up to a height of 4 inches above ground level and lowered to within 1.5 inches above ground level. It is raised and lowered in small 0.5 inch increments. The rear wheels which carry most of the weight of the Poulan Pro 42″ lawn tractor each measure 20×8-8 (20 inch diameter, 8 inch width, 8 inch rim diameter), while the front wheels which are responsible for steering the machine each measure 15×6-6 (15 inch diameter, 6 inch width, 6 inch rim diameter). Please leave a review of this tractor mower below. Click Here to purchase the Poulan Pro PB195H42LT.

Return to Poulan from Poulan Pro PB195H42LT Lawn Mower