The Snapper ZT2654 is the largest model in the Snapper 355Z series of zero turn lawnmowers. The smaller model is the Snapper ZT2446 lawnmower. The  ZT 2654 uses a Briggs and Stratton Extended Life Series Engine to power it’s wheels and it’s mower deck. This overhead valve, 2 cylinder engine has a total size of 0.34 liters. This gives it an output of 26 hp. The fuel tank on this lawnmower has a capacity to hold up to 24.6 liters (6.5 US gallons) of gas. The engine uses an extra large low noise muffler to help keep the engine as quiet as possible during operation.

This engine transfers power to the mower deck on the Snapper ZT2654. The mower deck is quite large, with a total cutting width of 54 inches. Rather than housing one blade, the ZT 2654 houses 3 small blades working in concert to give a smooth and even cut to whatever lawn you are working on. The mower deck has seven different positions that it can work at. The highest is 4.5 inches above the ground while the lowest is 1.5 inches above the ground.

The rear wheels on the Snapper ZT2654 zero turn lawnmower do all the work. They are both responsible for moving the machine forwards as well as turning it either left or right. The front wheels have little work to do other than to keep the machine balanced and to allow it to easily turn left or right. Power is transferred from the engine to the rear wheels through a dual hydrostatic transmission from Hydro-Gear. Power to each rear wheel is then controlled via the lap bars in front of the driver. Moving the lap bars in opposite directions is what allows it to execute turns with no radius. The ZT 2654 also comes with the option of headlights and a dump cart. Click Here to buy the Snapper ZT2654, aka the Snapper 355Z.

Return to Snapper from Snapper ZT2654 Zero Turn Lawnmower